1965 Mercury Comet - Tilt Floor Shift

Retrofit Series - This Retrofit column is for all the Ford/Mercury fans out there! The Ford style Mercury Comet tilt column features all Ford wiring and will accept your original Comet steering wheel. This column will attach to a modified original gearbox with an ididit installation kit. To install, simply remove the old column then cut and modify the shaft on your box into the 3/4"DD shape. Finish the installation of your new column using the original under dash mount and the new model specific floor mount that is included. Once in place, the original Comet wheel will be back in its original location and you'll have gained the convenience of 8-position tilt for that comfortable ride. Dimmer/wiper and cruise control options can NOT be added to the Ford Style column due to the manufacturers design of the Ford Style wiring harness.

Please Note: When installing your OEM steering wheel to your ididit Ford Style Retrofit Column, the OEM wheel must be for the same year application as the column. Use of a different year WILL result in damage to the turn signal switch.

FEATURES:

• 8-Position Tilt
• Ford Turn Signal Switch
• Early Ford Style Knobs & Levers
• Ford Wiring Connector
• Ford Splined Top Shaft
• 3/4"-36 Lower Shaft

Bolt your original Comet wheel directly to the column, no adpator required. (must be for the same year application as the column).