1967-69 Camaro/Firebird - Tilt Floor Shift

This retrofit column is designed to fit your Camaro or Firebird and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. Using an installation kit (contact us for kit), install your new steering column in place of the old. Using an adaptor, add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original. Or bolt your stock 1969 Camaro steering wheel directly to your new column. Each column comes complete with a wiring harness adaptor.Available in Paintable Steel, Chrome, Black Powder Coated,  Brushed Aluminum and Polished Aluminum finishes

FEATURES:

• 8-Position Tilt Ignition (1969 only)
• Self-Canceling Turn Signals
• 4-Way Flashers Knobs & Levers
• 3 7/8" Wiring Plug
• 1967-68: 1" 48 Shaft
• 1969: 3/4" 36 Shaft
• 1967-68 columns include Wiring Harness Adaptor
• 1969 column will plug directly into the factory wiring 

Steering Wheel Adaptor Required (for Aftermarket Wheel) 1969 or Newer GM Passenger Car 3, 5, 6, and 9 Bolt patterns available Or bolt your original 1969 Camaro wheel directly to the column

WHEN INSTALLING - A rag joint is a vibration reducer used between your column and gearbox. In some vehicles, the original rag joint is pressed onto the lower shaft of the column. If your rag joint has a pressed fit, it will need to be replaced. If your rag joint is removable, the original may be used. Please consider however that due to age, the original rag joint may be worn so please double check to make sure it is in good working condition. ididit, inc. always recommends replacing the rag joint.